Accessories for floor and superstructure
Floor reinforcement in rear of vehicle using chequered plates, and ideal reinforcement for heavy usage at loading platform.
Solid wood floors longitudinally installed between the main beams with edging made of omega profiles, 40 mm thick.
An elevated plywood rebound plate that is screwed to the front wall ensures additional protection and stability.
A double bulkhead in the front allows for even positioning of pallets and mesh boxes during loading and provides additional protection from excessive wear when securing heavy duty automotive parts.
Adapt the ram protection to meet your requirements. Our modular ram buffer product range offers a multitude of possibilities, whether it be with steel or rubber ram buffers. Their number and shape can also be selected.
Extended steel frame corners ensure additional protection when docking.
Buttrolls as an alternative collision protection. The hard rubber rollers easily take part in ramp height compensation.
A formed steel profile on the rear frame protects the locking rod from damage.
An additional foldable beam on the bulkhead, also allows for the sliding roof to be opened from the front.
A strap retainer, bolted to the transverse support of the roof simplifies securing cargo. After cargo loading, the flexible tube eases at a slight pull – the driver is spared the labour of throwing the strap over.
The hydraulic rear width extension for extra-wide cargo. When extended, the loading-through width is increased by 1,000 mm (500 mm per side). Plug-in posts are well protected against theft and soiling in the closed, transverse stow box under the chassis. For travelling the rear must be returned to its original condition.
Krone offers protection equipment to prevent water and ice plate build-up on the vehicle roof. Ice-Protect Air operates via an air hose between the roof tarp and the cross members. The on-board compressed air system supplies the air. The roof tarp is raised by approx. 175 mm to form a bowed roof.