Documents
Product-specific data sheets and operating instructions can be found in our download centre.
downloadBox Liner SDC 27 eLT3
The specialist for 40' containers with tunnel
The offset chassis carries containers up to 40' in length. The Box Liner SDC 27 eLT3 makes it possible to transport containers in the sizes 1 x 40' (with tunnel), 2 x 20', 1 x 20' in the middle (up to 30 tonnes) as well as 1 x 30' containers flush with the rear. An option is available for 40' containers without a tunnel.
Superior in any concern.
Advantages at a glance
- Specialist for containers with a tunnel
- Extremely stable and robust
- Chequer plate platform at rear
- Rear lights installed in a protected location
- Transport of 13.72 mm swap bodies
Always a plus on equipment.
Simply inimitable
The offset chassis carries containers up to 40' in length. The Box Liner SDC 27 eLT3 makes it possible to transport containers in the sizes 1 x 40' (with tunnel), 2 x 20', 1 x 20' in the middle (up to 30 tonnes) as well as 1 x 30' containers flush with the rear.
The Box Liner is fitted with robust steel ram buffers at the rear. In case of damage, the lighting bracket and the underrun protection must be replaced separately.
Folding container supports are provided for the front 20' container.
The folding lock mechanisms ensure easy and convenient conversion from 40‘ to 2 x 20‘.
The chequer plate platform allows even 20' containers transported in the middle can be unloaded at the ramp.
The two plug-in stops in the front support beam facilitate the correct placement of containers. The stops can be removed to allow access to the front 20' container.
Regardless of whether it is a traction rear or a standard rear, a back-up spotlight can always be installed in a protected manner.
The traction rear and traction+ combination on the SDC 27 eL20 ensures an excellent fifth-wheel load. The 25% drive axle load required in cross-border traffic can be achieved up to a container weight of approx. 28 tonnes (depending on the tractor unit) This combination also ensures that the load distribution of the SDC 27 eLTU70 is well-balanced.
If equipped with a spare wheel holder, the side collision protection can also be supplied in a fold-up version.
Lift axles automatically respond load-dependently. This allows you to reduce your tyre wear and save fuel.
A variety of warning signs can be fitted to the rear of the vehicle.
A genset (optionally from Genmark, Carrier or Thermoking) makes it possible to transport refrigerated containers at controlled temperatures. The genset also features its own fuel tank, which ensures that the cold chain is not interrupted even during road transport.
A genset (optionally from Genmark, Carrier or Thermoking) makes it possible to transport refrigerated containers at controlled temperatures. The genset also features its own fuel tank, which ensures that the cold chain is not interrupted even during road transport.
Accompanying documentation can optionally be transported in a protected manner in a document tube or in a document box (here mounted on the inside of the side collision protection).
Accompanying documentation can optionally be transported in a protected manner in a document tube or in a document box (here mounted on the inside of the side collision protection).
Technical data
Fifth-wheel load
0
kg
Axle load
0
kg
Permissible total weight
0
kg
Approx. dead weight:
0
kg
Services
KRONE quality does not end at the factory gate.
How can I help?
